Excelsior – Rangehood 24V Interlock System – Out of Stock ETA Aug 24

User Manual / PDF Download

Important Note: Please check with our store on 03 9462 1522 for stock availability before you visit, or by clicking the button below.

Usually Ships in 8 – 10 Business Days
  • Only Suited for Approved Gas Appliances with a Flame Failure System Fitted
  • Includes: Solenoid, 4m 24V Cable and Plug
  • Must be Installed by a Licensed Gas Fitter

Excelsior – Rangehood 24v Interlock System

This controller provides a solution to the Australian Standard requirements when installing an Excelsior range hood above a commercial gas appliance in residential premises. The gas solenoid valve supplied must be installed in the gas supply piping to the gas appliance. Once installed and connected to the controller the solenoid valve will be energised, allowing gas to flow, only when the range hood exhaust fan is running. Typically this controller would be fitted when a gas barbecue approved for commercial use is installed in a residential alfresco area under an Excelsior range hood.

Additional Features

  • Operational Voltage: 220 to 240 VAC
  • Solenoid Voltage: 24 VAC
  • Max Solenoid Current: 9 VA
  • Max Rangehood Current: 6 amps Inductive
  • Fuse Type: 100mA M205
  • Solenoid 24VAC: 1/2” BSP female – Max inlet pressure 5kPa

BBQ’s and Outdoor also stock an extensive range of Replacement Parts, to keep your barbecue performing at its best.

Can’t find what you’re looking for? If we don’t stock what you’re after we may be able to get it in as a Special Order item*. We have access to a comprehensive back catalogue of spare parts so if you’re after something specific don’t hesitate to reach out to one of our team members via phone or email (03 9462 1522 / [email protected]).

Enquire about this product

Please fill in the form below to send an enquiry about this product. One of our friendly team members will get back to you as soon as possible.

Store Locations

We currently have two convenient store locations serving all of your barbecue needs across Melbourne.

BBQs and Outdoor logo
Serial Number Required

Thank you for your Weber spare part purchase. Note, at checkout you will be required to provide a valid serial number from your barbecue to proceed with your purchase.

One of our consultants will verify the serial number and ensure the part is correct, if so you will be sent a payment link to finalise your order. If it is deemed your barbecue may still be within its warranty period or the serial number provided is invalid, you will be referred to Weber Australia for further assistance in obtaining the correct parts.