Herschel – Vulcan Infrared Heater


Important Note: Please check with our store on 03 9462 1522 for stock availability before you visit, or by clicking the button below.

  • Wall or ceiling mount
  • High power Tungsten-Halogen lamps
  • Heats large areas
  • Professional installation required
  • Requires 3 Phase 380 – 415V
  • Warranty | 2 Years

Herschel – Vulcan Infrared Heater

Herschel’s Vulcan Infrared workshop heaters are designed to heat large spaces like workshops and warehouses. They offer considerable advantages to operators seeking alternatives to gas or convection-based heating systems:

  • Vulcan provides heat exactly where and when you want it. Used to heat specific zones within a large space;
  • Pollution free – Vulcan does not emit any fumes and does not require additional ventilation;
  • Powerful – designed for industrial use;
  • Covers large areas from high installation heights

The Vulcan is also unique in being equipped with fans which serve two purposes of:

  1. Significantly enhancing heat distribution (in the direction the heating is pointing)
  2. Considerably extending the life of the lamps by keeping them cool, without affecting their radiance.

The Vulcan infrared workshop heater is ideal for industrial units wishing to avoid using fully convection-based or gas-based blower systems.

Available Sizes: 

  • 5kw – 30.5 x 30.5 cm
  • 9kw – 50 x 50 cm
  • 12kw – 50 x 50 cm

Click here to download the Data Sheet.

Installation Options

  • Can be installed pointing vertically downwards from heights of 3.5 – 6m above the ground using the supplied chain mounting kit.
  • Can also be wall-mounted angled downwards and an optional bracket can be purchased for this purpose.

The Vulcan Infrared Workshop Heater has no built-in controls. Please discuss control options with Herschel during the estimating phase of your heating project. The inbuilt fans have their own circuit and must be operational at all times that the lamps are operational and must continue to operate for at least a minute after the lamps are switched off. Failure to observe this requirement will invalidate the warranty.

Can’t find what you’re looking for? If we don’t stock what you’re after we may be able to get it in as a Special Order item*. We have access to a comprehensive catalogue of products so if you’re after something specific don’t hesitate to reach out to one of our team members via phone or email (03 9462 1522 / [email protected]).

Enquire about this product

Please fill in the form below to send an enquiry about this product. One of our friendly team members will get back to you as soon as possible.

Store Locations

We currently have two convenient store locations serving all of your barbecue needs across Melbourne.

BBQs and Outdoor logo
Serial Number Required

Thank you for your Weber spare part purchase. Note, at checkout you will be required to provide a valid serial number from your barbecue to proceed with your purchase.

One of our consultants will verify the serial number and ensure the part is correct, if so you will be sent a payment link to finalise your order. If it is deemed your barbecue may still be within its warranty period or the serial number provided is invalid, you will be referred to Weber Australia for further assistance in obtaining the correct parts.