Important Note: Please check with our store on 03 9462 1522 for stock availability before you visit, or by clicking the button below.
The Herschel Power industrial range provides a zero light infrared heating solution designed to heat large spaces such as warehouses, factories, sports halls, workshops and other commercial spaces. Designed and manufactured by Herschel in the UK and constructed from British Stainless Steel, the Power industrial workshop heater can be used to heat entire buildings or zones within large spaces. An ideal replacement to gas powered heating systems, the Power range is CO2 free when powered by renewable energy and can play a key part in delivering corporate net zero targets.
When used in zones within large spaces and properly controlled, significant energy savings can be achieved from the Power industrial workshop heater compared to traditional convection based space heating system as the heater can be used to directly warm people within an open area, for example packing bays, workstations. Alternatively the heaters can be used to heat an entire room within an enclosed space.
The Power range consists of 3 sizes, 3.2kW, 4.8kW and 6.4kW. The heaters are wired in 2 circuits allowing 2 power levels of 50% and 100% power levels when used with Herschel APX controllers. Heaters work on single phase 220-240v supply or can be used on 3 phase supply.
Our advanced APX control options include motion sensors, thermostat controls, timer switches and BMS integration.
For simple operation of single heaters we offer a 2 power level switch for manual operation providing ON/OFF, 50% and 100% power.
Power range has no moving parts, is maintenance free and totally silent. The Power range utilises Herschel’s long life ceramic emitters which produce a zero light far infrared heat which radiates downwards and can form a zone of gentle heat. The emitters have a typical lifespan of 7.000-10,000 hours and can be easily be replaced in situ by a competent electrician. The Power industrial workshop heater is close to 100% recyclable at end of life and is supplied in recyclable packaging.
Power range is designed to be suspended from ceilings (note the suspension kit is not supplied).
Heat intensity and area heated will vary by mounting height.
Please refer to Herschel or your dealer for details and for assistance with the choosing a control solution to meet your requirements.
Note: Emitters can give off a slight orange glow at higher voltages.
Can’t find what you’re looking for? If we don’t stock what you’re after we may be able to get it in as a Special Order item*. We have access to a comprehensive catalogue of products so if you’re after something specific don’t hesitate to reach out to one of our team members via phone or email (03 9462 1522 / [email protected]).
Please fill in the form below to send an enquiry about this product. One of our friendly team members will get back to you as soon as possible.
We currently have two convenient store locations serving all of your barbecue needs across Melbourne.
Thank you for your Weber spare part purchase. Note, at checkout you will be required to provide a valid serial number from your barbecue to proceed with your purchase.
One of our consultants will verify the serial number and ensure the part is correct, if so you will be sent a payment link to finalise your order. If it is deemed your barbecue may still be within its warranty period or the serial number provided is invalid, you will be referred to Weber Australia for further assistance in obtaining the correct parts.
